|
|||||||
|
|||||||
|
Overview Heater Return Pipe Gear Knob & Lever Luggage Rack Rear Light Covers Wind Deflectors Radiator Grille Fan Control (EFC) Rear Springs Fuel Filler Hose Electronic Ignition Jack & Extinguisher Vandalism Spare Wheel Repairs |
| NG Sports Cars | NG Owners Club | Site Map | ||||
Home BuildNG Kit CarSite |
||||
)
Heater Return PipeMay 2005 (Improvement)This is a mainly cosmetic modification, although it does make removal of the rocker cover easier when adjusting the valves. The heater return pipe normally runs over the top of the rocker cover but, having decided to fit a nice alloy cover, the pipe looked a bit of an eyesore so I re-routed it and made an attractive alternative.)
)
I used a piece of chrome plated 15mm copper tube (as used in plumbing) about
520mm in length and this was curved through 90° at one end (using a bending
spring).
It was then fixed with p-clips to a bracket fabricated from some 25mm angle aluminium (see photo on left).
|
||||
| About the Builder | Contact Me | Tips & Safety | ||||